Below is information necessary for CGTech to provide you with pricing to deliver custom machine and control files for use in Vericut software. Please fill out all sections. Please fill out one form for each machine.

 

 

Your Customer Id is located in Vericut. Go to the Help menu item and select License. At the top of the License page you will see your Customer Id #.

Simulate if the tool change sequence swings into the work zone and can possibly collide with machine features or the work piece setup

Typically a robot type apparatus used to change the work piece. Simulate if the part changing cycle could cause the work piece setup to hit a door or the enclosure

Adjust work offsets, Identify stock/fixture configuration, Inspect machined features

Ability to change tool spindles, head attachments, or spindle attachments

More than one tool spindle removing material at the same time

Programmable cross slide mounted to a rotating/spinning tool spindle allowing for changing tool diameter

Check for maximum tool length, large diameter tool interference in adjacent pockets, and tool exchange time

Simulate if the worktable changing cycle could cause the work piece setup to hit a door or the enclosure

Tools mounted at multiple index positions around a circular type component

Multiple tools mounted in static positions on a cross-slide

Rotating/spinning tool capability in a turret index position

Simulate if the steady rest could collide with the work piece setup or other machine components like a head/turret

Simulate if the tailstock could collide with other machine components like a head/turret/steady rest

A second/sub spindle used for part transfer/pick-off/done-in-one

Stock bar material fed into the work zone vs a static model

Ability to change tooling mounted in a turret index position

 

 

By entering information and clicking “Submit,” you agree to CGTech’s Privacy Policy.